NPN Often Drives 24V Metal Sensor NBB5 18GK50 E0 Proximity Switch Third Line

NPN Often Drives 24V Metal Sensor NBB5 18GK50 E0 Proximity Switch Third Line
  • Продавецww17.playrf.us
  • Список ценUS $88.89piece
  • Продажная ценаUS $88.89piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,1 (554)

Oписание продукта

Generator parts ADC120 12V or 24V actuator+ESD5500E speed controller governor+MSP6729 Magnetic Speed Sensor

 

ADC120:

1.External Actuator

2.motor operated valve actuator 
3.Actuator 4.Genset Actuator

Actuator ADC120-12V or ADC120-24V

Specifications

external actuator, 
generator actuator 
ADB225-24V, 
ADB225-12V, 
ADC225

Universal type for engines with 100 to 500kW rated power

  • ADB-225 ("MIL", amphenol connector, die cast housing, 12 and 24 volts)
  • ADD-225SC (2 pin mating packard connector included, 12 or 24 volts)
  • ADB-225F (includes position feedback sensorfor fuel control, 12 or 24 volts)

225 Series  

2.2 lb-ft of torque, 25° rotation, < 45 msec. response

Low cost, versatile model

Suitable for multi-plunger fuel pumps and medium size carburetors

Various models offer a variety of connectors and wiring harnesses, including feedback sensor

Outstanding reliability and performance

 

 P/N

 Actuator Description

ACB120

Multi VDC / MIL Connector / 20° Rotation

ADB120

Multi VDC / MIL Connector / 25° Rotation

ADB120E4

Multi VDC / MIL Connector / Fuel Metering /  PT Fuel System / 25° Rotation

ADC120

12 or 24 VDC / Commercial Connector / 25° Rotation

ADC120S

12 or 24 VDC / Commercial Connector / 25° Rotation / Serrated Shaft

ADD120S

12 or 24 VDC / Packard Connector / 25° Rotation / Serrated Shaft

 

Power Input Operating Voltage 12, 24, or 32 VDC
 Normal operating Current 2A at 12VDC   
 Maximum Current-Continuously 
 Rated
 6A at 12V DC, 
Performance Available Torque Max 1.0 ib-ft (1.4Nm)
 Maximum operating shaft Augular 
 Travel  ACB/ACE
 20± 1 degree CW/CCW
 Maximum operating shaft Augular 
 Travel  ADB/ADC
 25± 1 degree CW/CCW
Environmental Temperature Range -65 to + 200°F(-54° to +95 °C)
 Relative Humidity Up to 100%
 All Surface Finishes Fungus Proof and Corrosion Resitant
Reliability Vibration Up to 20 G 100 50-500 Hz.
 Testing 100% Tested
Physical  Dimensions See Diagram 1
 Weigh1 4.50 lbs.(2.05kg)
 Mounting Any position, Vertical Preferred
Mating Hardware  Connector ACB /ACE/ADB 120 EC 1000/ MS3106R  14S-6S (6 pins)
 Connector ADC120 Supplied with Actuator
 Lever ACB /ACE /ADB 120 LE 1400-1
 Lever ADC120 LE 1500-2
 Rod End Bearings (to attach a # 10-
 32 THD linkage rod to the lever)
 BR100(right hand) / BR101 (left hand)
 Wiring harness  ADC 120 4 ft.hrness supplied with actuator, other Lengths 
 Available from GAC
 ACE/ACB/ADB 120 Various Lengths availale from GAC

 

Please leave a message you need 12V or 24V (ADC120) when you buy.

 

ESD5500E:

The ESD5500E/5520ESeries speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.

*ESD5520E is designed for EFC series.
*Isochronous Operation/Steady Stability---- +/-0.25% or better
*Supply----12 or 24 VDC Battery Systems(transient&reverse voltage protected)
*Power Consumption----50 ma continuous plus acutator current
*Maximum Actuator Current at 25celsius (77celsius F)----10 Amps continuous 

Input
Supply
12 or 24 VDC Battery System (Transient and Reverse Voltage)
Polarity
Negative Ground (Case Isolated)
Power Consumption
50 ma continuous plus actuator current
Actuator Current Range @ 25 Deg. C - (Inductive Load)
Min.2.5 Amps; Max. 10Amps continuous
Speed Sensor Signal
0.5-120 Volts RMS
Performance
 Isochronous
Operation/Steady 
State Stability
±0.25% or better
Speed Range/Governor
1K to 7.5K Hz continuous
Speed Drift with Temperature
±1 Max
Idle Adjust CW
60% of set speed
Idle Adjust CCW
Less than 1200 Hz.
Droop Range
1-5% regulation
Droop Adj. Max. (K-L Jumpered)
400 Hz., ±75Hz. Per 1.0A change
Droop Adj. Min. (K-L Jumpered)
15Hz., ±6Hz. Per 1.0A change
Speed Trim Range
±200 Hz
Remote Variable Speed Range
500 - 7.5 Hz. Or any part there of
Terminal Sensitivity J
100 Hz., ± 15Hz / Volt @ 5.0 K Impedance
Terminal Sensitivity L
735 Hz., ±60 Hz / Volt @ 65 K Impedance
Terminal Sensitivity N
148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance
Terminal Sensitivity P
10 VDC Supply @ 20 ma Max
Environmental
Ambient Operating Temperature 
Range
-40 to +85 Deg. C
Relative Humidity
Up to 95%
All Surface Finishes
Fungus Proof and Corrosion Resitant
Reliability
Vibration
1G at 20 to 100 Hz.
Testing
100% Functionally Tested
Physical
Dimensions
See outline (FIGURE 1)
Weigh1
1.2 lbs.(545 grams)
Mounting
Any position, Vertical Preferred

 

MSP6729:

INTRODUCTION:

The magnetic speed sensor indicates when ring gear teeth, or other ferrous projections, pass the tip of the sensor. Electrical impulses are induced within the coil and sent to the speed control unit. The signal from the magnetic speed Sensor, teeth per second(HZ), is directly proportional to engine speed.

DESCRIPTION:

The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine. The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered over the ring gear teeth. A spot face should be present to provide a flat surface on which to anchor the locknut. With the engine stopped, screw 

the speed senor in until it touches a gear tooth, then back it out 3/4 of a turn and secure it with the locknut. Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet the speed control unit specifications

The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit. The leads may needshielding if they are longer than 10 ft. (3m), or if external interference is present.

Do not connect either of the speed sensor leads to anything but the speed control unit used. The shield should not be connected at the speed sensor end.

MSP6729:

3/8 - 24 UNF Threaded
2.5" Length with 6\' Shielded Cable

All are designed and tested to operate within a temperature range of -65°F to 225°F (-55°C to 105°C) .

Magnetic Speed Sensors are with Wire Leads

Item           Pickup Length     Thread Length         Lead Length      Thread Size             Drill Size

MSP 6729       2.7                     2.25                         72.00             3/8-24 UNF-2A            .332

 

 

 

2

17181920

910111314

78910

Our Services